Adhesion testing equipment to measure adhesion of coatings to metal, wood and other substrates

Adhesion Testing Dyne Technology Cross Hatch Cutter Dyne Technology Adhesion Testing Dyne Technology
  • Adhesion Testing Dyne Technology
  • Cross Hatch Cutter Dyne Technology
  • Adhesion Testing Dyne Technology

Hydraulic Adhesion Testers

The Hydraulic Adhesion Tester measures with ease and precision the adhesion bond strength of applied coatings. It is one of the most accurate & versatile manual adhesion testers available today.

The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin ensuring an exact central point loading of the force. Adhesion values are recorded by a pressure gauge giving a 1:1 pressure reading.

This testing equipment offers effective quality control with a non-destructive capability and can be tested on both external & internal surfaces of pipes.

Supplied with 5 Flat Dollies, Adhesive, Dolly Remover & Carrying Case. Complies with ISO 8780-5, ISO 787/16, ASTM D 332 & ASTM D 387

Contact us for more information or to get a quote.



Versions available:
• Standard Version 0 - 2600 psi
• Right-angled Version 0 - 2600 psi

Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.

Revolutionary self alignment feature and pull rate indicator.

Conforms to national and international standards including ISO 4624/16276-1 and others.

Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure.

Now available in 2 models - Manual or Automatic

The Automatic Unit features an electronically controlled hydraulic pump which automatically applies smooth and continuous pull-off pressure at a user-specified rate.

The Manual Unit features a heavy-duty manual hydraulic pump designed to apply smooth and continuous pull-off pressure with a single stroke.



Cross Hatch Cutter
Available in 2 sizes (1mm and 2mm), allows an assessment of the adhesion resistance of coatings to separation from substrates when a right-angled lattice pattern is cut into the coating and penetrates through to the substrate.

Can be used on multiple coatings. Precision-ground, hardened tool steel cutting blades with 6 cutting sides so when 1 cutting side becomes blunt there are a further 5 cutting sides to use.

Directions for use: Make one cutting pass through to the substrate. This makes 6 cuts in the coating. A second pass at 90º makes a square lattice pattern. Apply Adhesive Tape over the cut lattice section & within 5 minutes remove tape. Classify the cut area with a Viewing Lens according to the relevant national standard classification guide.



Complete kits with viewing lens and tape
1mm Cross Hatch Cutter Kit, for coatings up to 60µm thick (supplied in carrying case)
2mm Cross Hatch Cutter Kit, for coatings over 60µm thick (supplied in carrying case)



Cutters only
1mm Cross Hatch Cutter, for coatings up to 60µm thick (supplied in carrying case)
2mm Cross Hatch Cutter, for coatings over 60µm thick (supplied in carrying case) Adhesion Test Tape 60m Roll (ISO2409)

Click here to visit the cross hatch cutter product page.

For more Adhesion Testing Equipment visit our Dyne Testing website at http://www.dynetesting.com



Please contact us to find out how we can help you or to request a quote.

Clients using Dyne Technology
 
Online Resources - Register online for free access to useful technical information Customer Service FAQ's
Latest News
3
Nov
Dyne Technology Drive a Plasma Revolution to Optimise High Performance Industries Manufacturing Process and Bring Cost Savings
Dyne Technology, the UK and Irelands leading Plasma Treating equipment supplier have released the latest in Plasma Treating technology, adding to their already impressive portfolio of problem solving equipment. Dyne Technology have cemented their position as ...
Read more on this article