.Flame    ATmaP    Static Control    Plasma    Corona    Robotics            Surface Treatment Engineers 

 

Home
News Needle hubs
Test Ink Kit

Contact Information:

Tel:  +44 (0) 1543 411460
Fax: +44 (0) 1543 415140
Post: Dyne Technology Ltd
         Newton House
         5 Parkside Court,
         Greenhough Road
         Lichfield
         Staffordshire,
         WS13 7FE
         United Kingdom.
 
E-mail   
info@dynetechnology.co.uk
 
Web Site:
www.dynetechnology.co.uk

 

News.                                                                                                        >> Dyne Home Page

Sept 2010

We Have Moved!

Dyne Technology Ltd has moved to new and larger premises in Lichfield. Our new facilities incorporate a large Test Laboratory equipped with a wide range of corona treating, plasma treating and surface testing equipment. We are now able to offer unrivalled support to our customers.

 

Aug 2010

        Dyne Technology Launch New HF SpotTEC Corona Treater  

Dyne Technology has launched the new HF Tantec “high-frequency spot generator” onto the UK market. The new HF SpotTEC corona treating unit is a lightweight machine that makes it possible to connect not only one, but two treating heads to the same generator and control them separately.

HF SpotTEC creates a high-voltage, high-frequency corona discharge to treat the surface of three-dimensional moulded or extruded plastic parts, profiles, pipes and cables, containers, etc. – prior to coating or printing.

The purpose of Corona surface treatment of polymer-based materials is to increase surface wettability through electrical discharge. The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues and coatings. To obtain optimum adhesion, it is often necessary to increase the surface energy of the substrate to just above that of the material to be applied (typically 10mN/m). Surface Treatment with Corona results in good wetting of the material over the surface of the substrate and so improves adhesion.

The Dyne Technology supplied HF SpotTEC creates a high voltage, high frequency corona discharge to treat the surface of 3-dimensional moulded or extruded plastic parts, profiles, webs, containers, etc.

An airflow presses the discharge on to the substrate to be treated a counter electrode is not required. The electrical discharge creates the necessary functional polar groups on the polymer surface, which promotes adhesion and wettability to printing inks, adhesives and coatings.

 

PRESS RELEASES

>> Corona Treatment of Catheter tubing - March 2006

>> Dyne Technology launches new web site - March 2006

>> Corona Treatment of EPDM profiles - March 2006

>> Corona Treatment Test unit for Laboratories - March 2006

>> Corona Treatment unit - Spot Treater - March 2006

>> Dyne Test Inks - April 2006

>> Corona Treatment of Needle Hubs - April 2006

 

Contact Information:

Phone:    +44 (0) 1543 411460
Fax:        +44 (0) 1543 415140
Post:        Dyne Technology Ltd, Newton House, 5 Parkside Court, Greenhough Road, Lichfield, Staffordshire, WS13 7FE, United Kingdom.
E-mail     info@dynetechnology.co.uk

[Home] [News Needle hubs] [Test Ink Kit]

Copyright © 2005 - 2010 Dyne Technology Ltd - All rights reserved.   -   Web Site Design by 2 Stars   -   Last modified: 09/03/10