.Flame    ATmaP    Static Control    Plasma    Corona    Robotics            Surface Treatment Engineers 

 

Home
Up

Contact Information:

Tel:  +44 (0) 1543 411460
Fax: +44 (0) 1543 415140
Post: Dyne Technology Ltd
         Newton House
         5 Parkside Court,
         Greenhough Road
         Lichfield
         Staffordshire,
         WS13 7FE
         United Kingdom.
 
E-mail   
info@dynetechnology.co.uk
 
Web Site:
www.dynetechnology.co.uk

 

CORONA TREATMENT: WEB TREATER  

     

The purpose of corona surface treatment of polymer-based materials is to increase surface wettability through electrical discharge. The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues and coatings. To obtain optimum adhesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Surface Treatment with either Corona results in good wetting of the material over the surface of the substrate and so improves adhesion. For Wide Web corona treating, Dyne Technology offers:

WebTEC corona treatment for the flexible packaging industry allows increased surface energy on webs manufactured from a variety of materials including; paper, plastic, metallised film and foil. The compact design of the corona discharge unit enables the equipment to be easily installed to new or existing extrusion, printing, coating and laminating lines.

 

For a wide range of Silicone Sleeves << Click here>>

>> Dyne Home Page

Contact Information:

Phone:    +44 (0) 1543 411460
Fax:        +44 (0) 1543 415140
Post:        Dyne Technology Ltd, Newton House, 5 Parkside Court, Greenhough Road, Lichfield, Staffordshire, WS13 7FE, United Kingdom.
E-mail     info@dynetechnology.co.uk

 

[Home] [Up]

Copyright 2005 - 2010 Dyne Technology Ltd - All rights reserved.   -   Web Site Design by 2 Stars   -   Last modified: 09/03/10